Well-Maintained Ready-to-Jump Complete Skydiving Rig – SWS Fire, Sabre3 135, Speed-2000 135 & MARS M2 Multi

A well-maintained, ready-to-jump complete rig is being offered for sale with a carefully matched combination of proven skydiving components. The system has been privately owned, responsibly used, and consistently maintained according to normal skydiving practices. Consequently, a complete setup is being provided for a jumper who is looking for an established rig without having to source the container, main canopy, reserve, and AAD separately.

At the center of the system is an SWS Fire container manufactured in July 2018. Although the container was manufactured in 2018, the complete rig was assembled and placed into service in late 2019. Initially, a 150 sq ft main canopy was installed. However, the system was later configured with a Performance Designs Sabre3 135 during summer 2021.

Approximately 300 jumps have been completed on the Sabre3 135. Throughout its use, the canopy has been consistently packed, handled, and maintained. No unusual visible wear has been reported, and its overall condition has remained consistent with the stated jump numbers.

Complete Skydiving Rig in Well-Maintained Condition

Care has been given to the complete system throughout its ownership. Rather than being heavily circulated between multiple users, the rig has been privately owned and maintained. Therefore, its history has remained comparatively straightforward.

Normal skydiving maintenance and packing practices have also been followed. Furthermore, all major components are reported to remain in good condition.

The Speed-2000 135 reserve canopy has never been deployed during an emergency. In fact, zero reserve rides or openings have been recorded. Seven reserve repacks have been completed, and the canopy is described as being in excellent condition.

Meanwhile, activation-device protection is provided through a MARS M2 Multi AAD. The unit has been fully integrated into the system and is reported to be functioning as intended. A remaining battery level of approximately 57% is currently indicated.

Highlighted Rig Specifications

• Complete system: Well-maintained skydiving rig
• Container: SWS Fire
• Container DOM: July 2018
• Entered service: Late 2019
• Original main configuration: 150 sq ft
• Current main canopy: Performance Designs Sabre3 135
• Sabre3 installation: Summer 2021
• Main jumps: Approximately 300
• Main condition: Well maintained with no unusual visible wear reported
• Reserve canopy: Speed-2000 135 sq ft
• Reserve openings/rides: 0
• Reserve repacks: 7
• Reserve condition: Excellent
• AAD: MARS M2 Multi
• AAD status: Fully integrated and reported functioning as intended
• AAD battery remaining: 57%
• Additional equipment: Spare parts and accessories shown in the photos are included

Performance Designs Sabre3 135 Main Canopy

A Performance Designs Sabre3 135 has been fitted as the current main canopy. Approximately 300 jumps have been accumulated on the canopy, and consistent maintenance and packing have been carried out throughout its service life.

Since being installed during summer 2021, the Sabre3 135 has formed the primary main-canopy configuration for this system. Before that change was made, the SWS Fire container had been configured around a 150 sq ft main.

Importantly, no abnormal visible wear has been reported on the Sabre3. Instead, its condition is described as being consistent with its approximate jump count.

For prospective buyers, the documented configuration information makes the system easier to evaluate. Nevertheless, canopy suitability, wing loading, experience requirements, and compatibility should always be independently assessed before jumping the equipment.

Established Main Canopy Configuration

Because the canopy has already been integrated into the container, a complete system is being offered rather than a collection of unrelated components. As a result, buyers searching specifically for a Sabre3 135 complete skydiving rig can consider an already assembled package.

Moreover, the transition from the original 150 sq ft main to the current 135 sq ft Sabre3 has been clearly identified in the equipment history.

Speed-2000 135 Reserve Canopy

Backup canopy protection is provided by a Speed-2000 135 sq ft reserve. Most notably, the reserve has recorded zero emergency deployments and zero reserve rides.

Seven repacks have been carried out during its service history. Therefore, routine reserve maintenance has been performed while actual emergency use has not been required.

The reserve is reported to remain in excellent condition. Even so, as with any pre-owned parachute system, documentation, packing records, compatibility, and condition should be confirmed by an appropriately qualified rigger before the equipment is placed into service by its next owner.

MARS M2 Multi AAD

An additional safety component has been incorporated through the MARS M2 Multi Automatic Activation Device. The AAD is fully integrated into the rig and is reported to function as intended.

At present, approximately 57% battery capacity is shown as remaining. Consequently, the buyer is provided with useful information about the current indicated battery status instead of having to purchase the rig without knowing this detail.

Because AAD service requirements, operating limits, maintenance intervals, and replacement schedules may change according to manufacturer guidance, current requirements should be verified before use.

SWS Fire Container – DOM July 2018

The complete setup has been built around an SWS Fire container with a July 2018 date of manufacture. Although manufacturing was completed in 2018, the rig was not assembled and placed into active service until late 2019.

This distinction provides additional context when the age and service history of the system are considered.

Originally, the container was configured with a 150 sq ft main canopy. Subsequently, the main configuration was changed to the PD Sabre3 135 during summer 2021. Since then, the current arrangement has been maintained.

Privately Owned and Responsibly Maintained

Throughout its ownership, responsible care has been given to the system. All components are stated to remain in good condition, while normal packing and maintenance procedures have been followed.

Furthermore, the reserve has not been subjected to an emergency deployment. The main canopy has accumulated a moderate approximate jump count of 300, and no unusual visible wear has been reported.

Rather than being sold as an incomplete container requiring several additional purchases, the principal components needed for a complete parachute system are included.

Spare Parts and Accessories Included

Additional value is provided through the spare parts and accessories shown in the listing photographs. These items are being included with the sale as pictured.

Accordingly, prospective buyers should review the photographs carefully to identify the accessories supplied with the exact package. Only equipment specifically shown or confirmed as included should be assumed to form part of the sale.

Why Consider This Complete Skydiving Rig?

For a suitable jumper, several major pieces of skydiving equipment are being brought together in one established system. An SWS Fire container, Performance Designs Sabre3 135 main canopy, Speed-2000 135 reserve, and MARS M2 Multi AAD have already been combined into a complete setup.

Additionally, useful service-history information is available. The container DOM, approximate main-canopy jump count, reserve opening history, reserve repack count, AAD battery indication, and configuration changes have all been identified.

Therefore, the equipment can be evaluated with considerably more context than would be available from a listing containing only basic component names.

Complete Package Includes

Container: SWS Fire, DOM July 2018
Main: Performance Designs Sabre3 135, approximately 300 jumps
Reserve: Speed-2000 135, zero reserve rides/openings and seven repacks
AAD: MARS M2 Multi, approximately 57% battery remaining
Extras: Spare parts and accessories shown in the photographs

Ready for Inspection and the Next Owner

Overall, this well-maintained, ready-to-jump complete rig is being offered as a practical package for a suitably experienced skydiver searching for a complete system built around a Sabre3 135.

Care has been given to the equipment, the reserve has never been used during an emergency, and the major components are reported to remain in good condition. Moreover, the system has been routinely maintained and packed according to normal skydiving practices.

Before any pre-owned parachute equipment is jumped, however, a complete inspection by a qualified parachute rigger should be performed. Harness fit, component compatibility, reserve status, AAD status, canopy suitability, wing loading, and the jumper’s experience level should also be independently confirmed.

Once those checks have been completed and the equipment has been approved for the individual jumper, this SWS Fire complete skydiving rig with Performance Designs Sabre3 135, Speed-2000 135 reserve, and MARS M2 Multi AAD can provide a comprehensive equipment package for its next owner.