Vector V355

Vector V355 DOM 12/14/2017 – Complete Container System with OP235 Reserve & Cypres 2 AAD

A well-maintained Vector V355 DOM 12/14/2017 is being offered for anyone searching for a quality skydiving container system that can be completed with their preferred main canopy. Approximately 500 jumps have been placed on the rig, while its overall condition has been kept very good.

Built with the trusted Vector design, this system has been configured for a larger jumper and has been comfortably worn at approximately 6’2″ and 230 lb. A harness measurement of 18+2 is provided. Some additional room upward may be available; however, significantly less adjustment should be expected for a substantially smaller jumper. Therefore, professional harness fit verification should always be completed before the system is purchased or jumped.

Importantly, no main canopy is included with this package. Instead, the system is supplied with the Vector V355 container, an Optimum 235 reserve, and a Cypres 2 AAD.

Vector V355 DOM 12/14/2017 Condition

This Vector V355 DOM 12/14/2017 has accumulated approximately 500 jumps and has remained in great overall condition. Normal signs associated with responsible use may naturally be present, although the system has continued to be maintained carefully.

One small cosmetic patch has been installed on the BOC area. Rather than being left unattended, the affected area was professionally repaired by a Master Rigger. Consequently, the repair has already been professionally addressed.

Because skydiving equipment is life-support equipment, an independent inspection by a qualified rigger before use should still be arranged by the buyer. Furthermore, reserve repack requirements and AAD service status should be confirmed according to applicable regulations and manufacturer instructions.

Main Features at a Glance

• Container: Vector V355
• Container DOM: December 14, 2017
• Container jumps: Approximately 500
• Harness measurement: 18+2
• Previous jumper fit: Approximately 6’2″, 230 lb
• Overall condition: Great used condition
• Known repair: Small cosmetic patch on BOC
• Repair performed by: Master Rigger
• Reserve: Performance Designs Optimum 235
• Reserve DOM: January 2017
• Reserve repacks: 16
• Reserve rides/deployments: 2
• AAD: Cypres 2
• AAD DOM: November 2017
• Main canopy: NOT INCLUDED

Performance Designs Optimum 235 Reserve

A Performance Designs Optimum 235 reserve is included with the Vector V355 package. Its date of manufacture is January 2017, and the reserve has received approximately 16 pack cycles.

Additionally, two reserve rides have been recorded. This information is disclosed clearly so that the equipment history can be evaluated properly before purchase.

The Optimum series was designed as a low-bulk reserve option, which has made it popular in many appropriately sized container configurations. Nevertheless, reserve compatibility should never be assumed solely from canopy size. The container manufacturer’s sizing guidance, canopy manufacturer’s recommendations, packing volume, and qualified rigger assessment should all be considered.

Before the next jump, the reserve should be inspected and packed within the applicable legal repack cycle by an appropriately certificated rigger.

Reserve Specifications

Model: Performance Designs Optimum 235
Size: 235 sq. ft.
DOM: 01/2017
Pack cycles: 16
Reserve deployments/rides: 2
Included: Yes

By providing the reserve history upfront, a more informed buying decision can be made.

Cypres 2 AAD – DOM November 2017

A Cypres 2 automatic activation device is also included. The unit has a November 2017 date of manufacture.

Cypres AADs have been widely used in sport parachuting systems. However, an AAD should never be represented as a replacement for correct emergency procedures, proper training, or equipment maintenance. Its current service status, battery requirements, maintenance history, operating lifetime, and compatibility should be verified from the unit’s documentation and current Airtec guidance before use.

Therefore, the buyer should have the Cypres 2 checked as part of the complete rig inspection before the equipment is returned to service.

Harness Fit and Jumper Sizing

The harness is marked/configured at 18+2, and a fit reference has been supplied from the previous user, who measured approximately 6’2″ and 230 lb.

At that body size, a comfortable fit was reported. Some room for a slightly larger jumper may potentially be available, although very little room is expected for significantly smaller body dimensions.

Nevertheless, height and body weight alone should not be relied upon when selecting a harness/container. Torso length, inseam, chest dimensions, body proportions, clothing, and individual harness geometry can influence fit.

For this reason, actual fit should be evaluated by an experienced rigger or suitable skydiving professional.

A Strong Foundation for Building a Complete Rig

Because no main canopy is included, this Vector V355 package can be particularly useful for a jumper who already owns a suitable main or who wants to select a main canopy independently.

Rather than purchasing a configuration containing a main that may not match personal requirements, an appropriate main can be selected according to experience level, exit weight, wing loading, intended discipline, container compatibility, and manufacturer guidance.

Main canopy compatibility with the Vector V355 should always be confirmed before purchase or installation.

What Is Included?

The package is being offered with:

• Vector V355 container – DOM 12/14/2017
• Approximately 500 jumps on the container
• 18+2 harness configuration
• Performance Designs Optimum 235 reserve – DOM 01/2017
• 16 reserve pack cycles
• 2 reserve rides
• Cypres 2 AAD – DOM 11/2017
• Professionally repaired small BOC cosmetic patch

What Is Not Included?

• Main canopy is NOT included

This distinction is important because the buyer will need to source and install a compatible main canopy before the system can become a complete jumpable rig.

Professionally Addressed BOC Repair

Used skydiving equipment should be described transparently. Accordingly, the small cosmetic patch located around the BOC area is disclosed as part of the listing.

The area was repaired by a Master Rigger, rather than being left as untreated wear. While the repair has been professionally completed, the buyer should still have the complete container inspected by their own qualified rigger.

Such an inspection provides an opportunity for the harness, webbing, stitching, closing loops, riser covers, deployment system, reserve system, handles, and other applicable components to be evaluated before use.

Why Consider This Vector V355?

A useful combination of established components is provided by this package. Furthermore, the absence of a main canopy allows greater freedom when the system is being configured for the next owner.

The Vector V355 DOM 12/14/2017 has approximately 500 jumps, while a large Optimum 235 reserve and Cypres 2 AAD are already included. Consequently, a significant portion of the equipment needed for a complete rig is already present.

The known cosmetic repair has also been openly disclosed and was handled by a Master Rigger.

For a suitably sized and appropriately experienced jumper, this setup may provide an excellent foundation from which a complete rig can be assembled once the correct main canopy has been selected and installed.

Vector V355 DOM 12/14/2017 – Final Equipment Summary

This Vector V355 DOM 12/14/2017 is presented as a well-kept used skydiving system with approximately 500 jumps. It has been comfortably fitted to a jumper measuring approximately 6’2″ and 230 lb, with the harness listed as 18+2.

An Optimum 235 reserve, DOM January 2017, is included and has been packed approximately 16 times with two recorded reserve rides. A Cypres 2 AAD, DOM November 2017, is also supplied.

One small cosmetic BOC patch has been professionally repaired by a Master Rigger. Most importantly, no main canopy is included, so a compatible main must be selected and installed before the rig is considered complete.

Before jumping the equipment, the entire system should be inspected by a qualified rigger, the reserve should be within its required repack cycle, and the Cypres 2 service status should be verified.

For buyers seeking a Vector V355 container with Optimum 235 reserve and Cypres 2 AAD, this package provides a practical starting point for building a properly fitted and professionally verified skydiving system.